Place the tank on a firm, flatbed invert with all the base parts, stepping on it. Not even the smaller parts of the base should not be beyond the invert. Be aware that the tank must be placed on a clean invert and take away any odds and sods that can cause damage to the tank. (Such as small stones, nails, etc.)
Remove the plastic bung and connect it to the supply, holding at the same time the nut of the fittings. The export nipple should not rotate at all. The connection and the structural waterproof are the exclusive responsibility of the installer. The producer bears no responsibility regarding the installation.
The connection parts should not accept any shocks or strikes
The black tank is suitable for exteriors, as the content inside has better protection from UV. In contrast, the white tank is suitable for internals.
The underground installation of the tank is not recommended. Except if it complies with terms and conditions. In this case, please first contact the supplier.
Some chemical liquids are allowed but please first contact the supplier.
Do not place any heavy items on the side or on the top of the tank.
Avoid putting pressure on the tank.
None of the sides of the tank has to touch any obstacle. Let some distance perimeter of the tank.
In the case of grid connection, it is necessary to install shockproof (elasticated) links and relief valves, when is obligatory.
In case of content received by the pump, make sure that the tank is ventilated properly.
Watch out for the refiling process so in case of a leak you can stop the process.
The titration is solely indicative.
The fittings are 1″
The company is not responsible for further additional parts.
